DR ALL-TERRAIN Wartungshandbuch Seite 546

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 594
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 545
16-70 ELECTRICAL SYSTEM
Actuator Control System
Engine Brake Actuator Installation
Apply grease and Install:
O-ring [A]
Apply molybdenum disulfide grease to the pin [B].
Apply grease to the trim seal [A] and install the cover [B].
Insert the pin into the collar [A] of the engine brake lever
assembly [B].
Wipe off any protruding grease.
Tighten the actuator mounting bolts following the tighten-
ing sequence [1 3].
Torque - Engine Brake Actuator Mounting Bolts: 8.8 N·m
(0.90 kgf·m, 78 in·lb)
Apply grease (Amoco Rykon Premium grease No.2 EP
Green) to the actuator connector, and connect it.
Actuator Control System Outline
The actuator controller has a microprocessor that detects
vehicle speed, state of the selectable 2WD/4WD shift
switch, ignition switch, and the forward/reverse movement
of the vehicle in order to control the engine brake actuator
and selectable 2WD/4WD actuator.
Seitenansicht 545
1 2 ... 541 542 543 544 545 546 547 548 549 550 551 ... 593 594

Kommentare zu diesen Handbüchern

Keine Kommentare