DR ALL-TERRAIN Wartungshandbuch PDF herunterladen (Seite 223)

100

101

ENGINE TOP END 5-41

Cylinder and Piston

Piston Ring, Piston Ring Groove Wear Inspection

•

Check for uneven groove wear by inspecting the ring seat-

ing.

The rings should fit perfectly parallel to groove surfaces.

If not, replace the piston and all the piston rings.

•

With the piston rings in their grooves, make several mea-

surements w ith a thickness gauge [A] to determine piston

ring/groove clearance.

Piston Ring/Groove Clearance

Standard:

Top

0.04 ∼ 0.08 mm (0.0016 ∼ 0.0032 in.)

Second 0.03 ∼ 0.07 mm (0.0012 ∼ 0.0028 in.)

Service Limit:

Top

0.18 mm (0.0071 in.)

Second 0.17 mm (0.0067 in.)

If the piston ring/groove clearance is greater than the ser-

vice limit, measure the ring thickness and groove width as

follows to decide whether to replace the rings, the piston

or both.

Piston Ring Groove Width Inspection

•

Measure the piston ring groove width.

○

Use a vernier caliper at several points around the piston.

Piston Ring Groove Width

Standard:

Top

1.03 ∼ 1.05 mm (0.0405 ∼ 0.0413 in.)

Second 1.02 ∼ 1.04 mm (0.0402 ∼ 0.0409 in.)

Service Limit:

Top

1.13 mm (0.0445 in.)

Second 1.12 mm (0.0441 in.)

If the width of any of the two grooves is wider than the

service limit at any point, replace the piston.

Piston Ring Thickness Inspection

•

Measure the piston ring thickness.

○

Use a micrometer to measure at several points around

the ring.

Piston Ring Thickness

Standard:

Top

0.97 ∼ 0.99 mm (0.0382 ∼ 0.0390 in.)

Second 0.97 ∼ 0.99 mm (0.0382 ∼ 0.0390 in.)

Service Limit:

Top

0.90 mm (0.035 in.)

Second 0.90 mm (0.035 in.)

If any of the measurements is less than the service limit

on either of the rings, replace all the rings.

NOTE

○

When using new rings in a used piston, check for un-

even groove wear. The rings should fit perfectly parallel

to the groove sides. If not, replace the piston.

1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 593 594

Kommentare zu diesen Handbüchern

Keine Kommentare

DR ALL-TERRAIN Wartungshandbuch Seite 223

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rasenmäher DR ALL-TERRAIN