DR ALL-TERRAIN Wartungshandbuch Seite 202

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 594
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 201
5-20 ENGINE TOP END
Camshaft
Face the arrow [A] of the front camshaft sprocket upward
(right side view).
Engage the front camshaft chain with the front camshaft
sprocket.
Align the marks [B] on the weights with the front cylinder
head upper surface.
Install:
Rocker Cases (see Rocker Case Installation)
Camshaft Chain Tensioners (see Camshaft Chain Ten-
sioner Installation)
Check the valve clearance (see Valve Clearance Inspec-
tion).
Camshaft Assembly
Install the KACR unit [A] (sprocket) on the camshaft so
that the unit fits onto the camshaft pins [B].
Apply a non-permanent locking agent to the c amshaft
sprocket bolts [C].
Tighten:
Torque - Camshaft Sprocket Bolts: 12 N·m (1.2 kgf·m, 106
in·lb)
Cam Wear Inspection
Remove the camshaft.
Measure the height [A] o f the cam with a micrometer.
If the cams are worn past the service limit, replace the
camshaft.
Cam Height
Standard:
Exhaust
35.363 35.477 mm (1.3922 1.3967 in.)
Inlet
35.622 35.736 mm (1.4024 1.4069 in.)
Service Lim it :
Exhaust
35.26 mm (1.388 in.)
Inlet
35.52 mm (1.398 in.)
Seitenansicht 201
1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 593 594

Kommentare zu diesen Handbüchern

Keine Kommentare