COOLING SYSTEM 4-17
Thermostat
Thermostat Removal
•
Drain the coolant (see Coolant Change in the Periodic
Maintenance chapter).
•
Remove:
Front Fender (see Front Fender Removal in the Frame
chapter)
Water Temperature Sensor Connector [A]
•
Remove:
Water Pipe Bolt [A]
•
Remove:
Thermostat Housing Cover Bolts [A]
Thermostat Housing Cover [B]
Thermostat
Thermostat Installation
•
Install:
Thermostat [A]
•
Be sure to install the O-rings [B] on the housing cover and
water pipe.
•
Tighten:
Torque - Thermostat Housing Cover Bolts: 8.8 N·m (0.90
kgf·m, 78 in·lb)
Water Pipe Joint Bolt: 8.8 N·m (0.90 kgf·m, 78
in·lb)
•
Add coolant (see Coolant Change in the Periodic Mainte-
nance chapter).
Kommentare zu diesen Handbüchern