DR PRO Betriebsanleitung PDF herunterladen (Seite 40)

36 16.50 PRO DR

RAPID-FEED™ CHIPPER

4. Closely inspect the Chipper Knife and Wear Plate for

nicks or dull (rounded) edges (Figure 35).

5. If necessary, repair or replace the Chipper Knife and/or

Wear Plate per the following procedures. If the Knife

and Wear plate do not need maintenance or

adjustment, replace the Hopper.

Removing and Replacing the Chipper Knife

Tools Needed:

• 5/16" Wrench

• 9/16" Socket

• 7/32" Allen wrench

• Awl or Sharp Tool

• Gloves

1. Remove the Belt Guard (see “Removing and Replacing

the Drive Belt” in this Chapter to remove the Belt

Guard).

2. Using a 5/16” Wrench, remove the Self -Tapping

Screws and remove both Knife Access Covers from the

front and back of the Chipper Assembly (Figure 36).

3. Rotate the Flywheel using a stick until the three

countersunk Allen Screws and Lock Nuts attaching the

Knife to the Flywheel are visible through the Access

Openings.

4. Clean out the heads of the Allen Screws with an Awl or

Sharp Tool.

5. Insert a 7/32” Allen Wrench into the head of a screw

(Figure 37).

6. While holding the Allen Wrench, remove the Lock Nut

using a 9/16" socket.

7. Repeat Steps 5 and 6 for the remaining two Allen

Screws.

Chipper Knife

(sharp edge

facing up and

towards you)

Figure 37

Countersunk

Allen Screws and

Locknuts

Flywheel

Slot

Rear Knife Access

Cover (one on the

front side also)

Figure 36

Self -

Tapping

Screws

Chipper

Knife

Figure 35

Wear

Plate

BE CAREFUL AND WEAR GLOVES WHEN WORKING NEAR

THE CHIPPER KNIFE. THE KNIFE EDGE CAN CUT YOU IF

YOU COME IN CONTACT WITH IT.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare

DR PRO Betriebsanleitung Seite 40

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rasenmäher DR PRO