DR PRO Betriebsanleitung PDF herunterladen (Seite 29)

Starting the Engine (Electric–Starting Chipper)

1. Ensure that the Fuel Shut-Off Valve is in the “ON”

position (Figure 14).

2. Move the Choke Control Lever to the “CHOKE”

position (Figure 19) (leave in the RUN position if the

engine is already warm).

3. Ensure that the Throttle Control Lever is in the slow

position (turtle icon) (Figure 20).

4. Insert the Key into the Key Switch and turn the Key to

the “START” position until the engine starts, then

release it (Figure 21). The Key Switch will snap back

to the “RUN” position and the engine will continue to

run.

5. As the engine warms up, slowly adjust the Choke to

the “Run” position. Wait until the engine runs

smoothly before each Choke adjustment. For

chipping, operate the engine with the Throttle in the

fast position (rabbit icon) with the Choke pushed in to

the “RUN” position.

Choke

Control

Lever

Figure 19

“RUN” “CHOKE”

Throttle

Control

Lever

Figure 20

Slow

Fast

Figure 21

Key Switch

“STOP”

“START”

“RUN”

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 79 80

Keine Kommentare

DR PRO Betriebsanleitung Seite 29