DR PRO Betriebsanleitung PDF herunterladen (Seite 56)

52 16.50 PRO DR

RAPID-FEED™ CHIPPER

OPERATION

Adjusting the Extended Top-Discharge Chute Discharge

Direction:

1. Pull the Hitch Clip and remove the Locking Pin (Figure

49).

2. Rotate the Extended Top-Discharge Chute to the

direction desired.

NOTE: The Extended Top-Discharge Chute has a range of motion of

180˚ that spans the front and both sides of the Chipper. There are 11

different hole settings at 18˚ increments that you can use.

3. Line up the Locking Pin hole to the closest hole setting

in the Discharge Ring.

4. Install the Locking Pin and secure it with the Hitch

Clip.

Adjusting the Deflector Direction:

1. Grab the Deflector Handle and rotate the Deflector to

the desired discharge position (Figure 50).

MAINTENANCE

Tools and Supplies Needed:

• All Purpose Grease

Lubricating the Extended Top-Discharge Chute:

1. Pull the Hitch Clip and remove the Locking Pin from

the Discharge Ring (Figure 49).

2. Apply some all-purpose grease in each hole of the

Discharge Ring and Center Ring as you rotate the

Chute.

3. Rotate the Extended Top-Discharge Chute for the full

180˚ of rotation for a few times to spread the grease

inside the Discharge Ring.

4. Reposition the Extended Top-Discharge Chute to the

desired angle and insert the Locking Pin and Hitch

Clip.

Deflector

Figure 50

Deflector

Handle

Higher

Discharge

Lower

Discharge

Locking

Figure 49

Hitch

Clip

Extended Top-

Discharge Chute

180°

Discharge

Ring

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare

DR PRO Betriebsanleitung Seite 56

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rasenmäher DR PRO