DR PRO Betriebsanleitung PDF herunterladen (Seite 19)

1. Cut the Plastic Banding that is securing the Parts Box

and any Accessory Box that may be strapped to the

Crate Top (Figure 5).

2. Pry off the bottom four boards that connect the Crate

top to the Pallet.

3. With help from another person, lift the Crate Top

from the Pallet.

4. Remove the Parts Box and the Road-Tow Package (if

ordered).

5. Carefully cut the Steel banding holding the machine

and Hopper Assembly to the pallet (Figure 6).

6. Cut the Plastic Banding that is holding the Extended

Top-Discharge Chute (if ordered) to the Pallet and

remove the Extended Top-Discharge Chute.

7. With the help of another person, carefully remove the

Hopper Assembly and roll the 16.50 PRO DR RAPID-

FEED CHIPPER from the shipping pallet, resting it on

the Tongue Assembly.

8. Compare the contents of the shipping carton and the

Part Box with the Parts Supplied list on the previous

page. If there are any questions contact us at

www.DRpower.com or call 1-800-DR-OWNER (376-

9637). Do not discard the shipping materials until

you are fully satisfied with your new 16.50 PREMIER

DR RAPID-FEED CHIPPER.

Plastic

Banding

Bottom

Board

Figure 5

Pallet

Crate Top

• WEAR EYE PROTECTION WHEN CUTTING THE BANDING. THE BANDING MAY HAVE A LOT OF

TENSION ON IT AND MAY SNAP AND CUT YOU. ALWAYS STAND TO ONE SIDE WHEN CUTTING

THE BAND.

• STABILIZE THE SHIPPING CONTAINER ON CLEAN FLAT TERRAIN BEFORE ATTEMPTING TO

UNPACK AND ASSEMBLE THE CHIPPER.

• FOR YOUR SAFETY WE RECOMMEND YOU HAVE TWO PEOPLE FOR THE FOLLOWING

PROCEDURES.

Steel

Banding

Plastic

Banding

ure

Chipper

Assembly

Hopper

Assembly

Steel

Banding

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare

DR PRO Betriebsanleitung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rasenmäher DR PRO