DR ALL-TERRAIN Betriebsanleitung PDF herunterladen (Seite 9)

ALL-TERRAIN

™

MOWER Assembly, Installation & Maintenance Instructions for the 42" Lawn Mower Deck 9

To Remove the Blades

Tools Needed:

• 9/16" wrench or socket

• Rag or gloves to handle the blade

Note:

You may want to block the blade with a piece of wood between the blade and the deck to hold

it while turning the nut.

1. Remove the blade bolt, lock washer and blade washer.

2. Remove the blade.

3. Repeat with the other blade.

To Replace the Blades

1. Mount the blade, blade washer, lock washer and blade bolt, in that order, and tighten securely

(Torque 30-40 ft-lbs.).

Instructions for Leveling the DR

42 Lawn Deck

The DR

42 Lawn Deck settings made at the

factory are suitable for most purposes, however

leveling adjustments can be made if desired.

Tools Needed:

• 1/2" wrench or adjustable wrench

• 3/16" hex key

Note: All references to Left and Right are from

the Operator's position.

1. Move the machine to a level area.

2. Turn the machine off and disconnect the

spark plug wire.

3. Remove the belt covers and locate the

adjustment brackets (Figure 12).

4. Level the deck from front to back:

Note: You should adjust the deck so the back is

1/4" higher than the front. This will give you the

best cut.

Figure 12

WARNING! Always disconnect the spark plug wire before servicing your machine.

Caution: Be aware of the sharp blade when pushing or pulling the wrench.

WARNING! Always disconnect the spar

plug wire before servicing your machine.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

DR ALL-TERRAIN Betriebsanleitung Seite 9